Carestream (Kodak) Dental Xray & Imaging Software. How to install the TWV ® v6.04 using Microsoft Windows XP Click on the image to download TWV Welcome to Kodak’s Trophy ® Windows Imaging Products. It is most likely that you will have been sent an Email or a CD containing some Trophy xrays and you would. Experience the diagnostic power of XDR's Dental Imaging Software. Clinically engineered for superior image capture, max compatibility & ease. Peer rated for excellence, see the difference for yourself.
![]() Table of Contents > Networking Your Printer > Connecting to a wireless network 2 Networking Your Printer
To connect your printer to an 802.11b/g/n wireless (Wi-Fi) network, refer to the following information.
Before you connect
You need:
Connecting to a wireless network using the Wi-Fi Setup Wizard
You can use the Wi-Fi Setup Wizard on the printer to connect to your wireless network. Use the procedures that is appropriate for your network setup.
Connecting to a non-WPS wireless router
To connect your printer to your wireless network, you need to know the network name, also called the Service Set Identifier (SSID). You can obtain your network name from the wireless router. See the manufacturer's documentation for more information.
If you have enabled security on your network, you also need to know the security string (passphrase or password), which may be a Wired Equivalent Privacy (WEP) or a Wi-Fi Protected Access (WPA/WPA2) passphrase.
Record your network information using the correct uppercase and lowercase letters.
Network Name (SSID):
Security String (case-sensitive):
Connecting to a WPS wireless router
If your router supports Wi-Fi Protected Setup (WPS), use WPS Connect. WPS lets you configure your printer for a wireless network by pressing buttons or entering a PIN.
To connect to a network using WPS:
Setting up an IP Address
All IP Address entries have the following format: 000.000.000.000. If an address or Subnet Mask has only one or two characters between the periods, include one or two leading zeros in front of that number. For example:
To set up your IP Address on the printer:
Viewing the network configuration
To view the network configuration and verify that you are connected to your wireless network:
Printing the network configuration
To print the current network configuration:
Installing your printer on additional computers on the network
To add your printer to another computer(s) on your network, install the KODAK All-in-One Printer Software on each computer.
![]() Connecting to another KODAK All-in-One Printer
If you are connecting to a newer model printer (for example, you have an ESP OFFICE 6150 Printer and now you are adding an OFFICE HERO 6.1 Printer), you must install the KODAK All-in-One Printer Software for the newer model.
On a computer with WINDOWS OS:
On a computer with MAC OS:
PreviousNext
Kodak-Trophy – Shareware – Windows
31 users of UpdateStar had Kodak Dental Imaging Software Installation installed last month.
![]() Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |